Cold Water Dispenser RO System
Our company is noted as one of the well known manufacturers and suppliers of Cold Water Dispenser RO System. With the aid of our sound machines & technology, we are competent to manufacture wide range of water dispenser in compliance with predefined industry standards. These dispensers are widely demanded in offices, homes, hospitals, schools and colleges. Our offered Cold Water Dispenser RO System is highly appreciated in the market for its features such as rugged design, unmatched performance and excellent durability.
Five Level Purification Process:
(Reverse Osmosis Filtration)
Level 1: 5 micron-spun filter, removes the Physical & Suspended Impurities such as Sand, Silt, Dust, Rust, Hair etc.
Level 2: Granular Activated Carbon (GAC) removes the colour & free chlorine in the water and also absorbs the Organic impurities on its surface.
Level 3: Activated Block Carbon, is a protective mechanism to safeguard the highly sensitive RO membrane.
Level 4: This is the most advanced Thin Film Composite Reverse Osmosis Membrane designed to remove dissolved impurities.
Level 5: Post Carbon cum Water Polisher, is Silver impregnated activated carbon filter to prevent the growth of bacteria at the point of use and to restore the natural taste of water.
System Recovery: 40 to 50 %
Salt Rejection: 90-95 % of the inlet TDS
Hot & Cold Water Dispenser: (With extra 8 Ltr. Jar)
Stage Food Grade Tank
Chilled Water Storage: 3.5 Ltr. (Total storage-5Ltrs.)
Hot water Storage: 1.5 Ltr.
Dimensions of Dispenser
H x W x D (mm): 1055 x 390 x 390 (without extra jar)
GR. WT. (Kg.): 26 (with RO system & empty extra jar)
Height of Extra Jar: 240 mm. (Storage capacity of Jar = 8 Ltrs.).
Required Inputs For Installation
Water Inlet: Feed water terminal with inlet pressure = 0.8 to 2 Kg/cm2
Drain Pipe: For the disposal of reject water from RO System.
Electric Supply: AC~230 V/50 Hz.